Ozone Products

Water-Sterilizer

Specification

Ozone generator Type: Corona Discharge
Dielectric shell: Stainless steel
Transformer: 110/220V AC 50/60Hz
Oxygen feed gas: Minimum 5 lpm >93% purity 1.5 bar -60 dew point
Cooling: water/ Air cooled
Venturi: ¾ inches
Pressure: 3 bar
Flow: 3-4 M3

TGCDI-Series-1

Specification

Coverage : 800 Sq/Ft – 8,000 Cu/Ft
Timer : 0-60 Minutes Continuous Hold
Fan : 100 CFM
Volts/Watts : 110/27
Amps/Hz : 33/60
Output : 400 Mg/Hr
Plates : 1
Size : 7.5″H 9″W 12.5″D
Weight : 9.25 Lbs

TGCDI-Series-1

Specification

Coverage : 800 Sq/Ft – 8,000 Cu/Ft
Timer : 0-60 Minutes Continuous Hold
Fan : 100 CFM
Volts/Watts : 110/27
Amps/Hz : 33/60
Output : 400 Mg/Hr
Plates : 1
Size : 7.5″H 9″W 12.5″D
Weight : 9.25 Lbs

Air-Water-SterilizerTGAWS2

Specification

Discharge: Corona discharge
Eht: Ferrite based air cooled
Enclosure – moc: Carbon steel /stainless steel/pl
Enclosure protection: Ip- 54
Line voltage: 12v dc;110/220 v ac; 50/60 hz: 1 phase
Feed gas: Ambient dry ,dust and moisture free air
Ozone concentration: 1500-2000mg / 800-500 mg/m3
Moc of ozone cell: Ss 316/ceramic
Cell cooling: Forced air cooled -internally and externally

Air-Water-Sterilizer

Specification

Discharge: Corona discharge
Eht: Ferrite based air cooled
Enclosure – moc: Carbon steel /stainless steel/pl
Enclosure protection: Ip- 54
Line voltage: 12v dc;110/220 v ac; 50/60 hz: 1 phase
Feed gas: Ambient dry ,dust and moisture free air
Ozone concentration: 400-500 mg/m3
Moc of ozone cell: Ss 316/ceramic
Cell cooling: Forced air cooled -internally and externally

Water-Purifier

Specification

Ozone conc.(in water): 0.6-1.0mg/L Wall-mounted design
Input Voltage: 100-240V AC, 50/60Hz Power: 36W

Air-and-Water

Specification

Ozone Output: 300mg/h at 2.5L/min dry air (230mg/h at 2.8L/min ambient air with RH85%, 25℃)
Air flow rate: 2.5-2.8L/min
Voltage: 100-240V AC (12V DC to drive the product)
Power: 12W
Accessories: power adaptor, Silicon hose, stone diffuser, instruction manual

Air-Water-SterilizerTGAWS2

Specification

Ozone therapy.
Power: <15 W,1A
Input Voltage: 110/220V AC 50/60Hz
Material: Titanium electrode and quartz tube

Household-Tap-Water

Specification

Automatical work way: deliver ozone water once the water tap is open
Ozone conc.(in water): 0.5-1.0 mg/L
Water flow rate: 4-8L/min
Accessories: power adaptor, silicon hose, universal water tap adaptor, ozone mixer, instruction manual
Input Voltage: 100 – 240 VAC
Rated Power: 8W

Water-Sterilizer

Specification

Ozone Output: 300/500mg/h at 2.5L/min dry air(230mg/h at 2.8L/min ambient air with RH85%, 25℃)
Air flow rate: 2.5-2.8L/min
Voltage: 100-240V AC (12V DC to drive the product)
Power: 12W
Accessories: power adaptor, Silicon hose, stone diffuser, instruction manual

TGCDI-Series-1

Specification

Negative ions: 3×10 ⁶pcs/cm3
Active oxygen: 20~40 mg/h
Rated power: 0.2W
Voltage: 6V
Built-in timer: 2min ON, 10 min OFF cycle 4 AA Batteries With adaptor, USB cable, available for car and home

Air Purifier

Air-Purifier-Neo

Specification

Stage of Purification: 5/6
Coverage Area: 200 Sq.ft
Operation & Display: LED Panel
Specifications: Size(mm)-329x170x303 Weight(KG)-4 Power(W)-36
Air Flow Volume(m3/hr): 150
Noise Level dB(A): 40
Special Settings: Automatic & Timer Modes
Alerts/Safety: Automatic Shut Off

Air-Purifier-Touch

Specification

Stage of Purification: 5/6
Coverage Area: 500 Sq.ft
Operation & Display: IMD Touch screen with Temperature, Humidity and PM 2.5 display
Specifications: Size(mm)-360x206x536 Weight(KG)-6.3 Power(W)-45
Air Flow Volume(m3/hr): 330
Noise Level dB(A): 44
Special Settings: Smart Mode-Automatic PM 2.5 detection & Control with 3 operating speeds.
Alerts/Safety: Filter and Lamp Health Indicator